OCF 6.1 Open Channel Flow & Tank Level Meter
- Safe, simple, and accurate non-contacting ultrasonic flow or level
- Large LCD display with built-in configurator
- Flexible outputs – one isolated 4-20mA and two relays
- Optional MODBUS® RTU Output
- Expanded flume & weir selections
- cCSAus hazardous area approvals for sensors
Continuously monitor, display, totalize and data log flow and level through any flume or weir. The OCF 6.1 includes a non-contacting ultrasonic sensor that mounts just 8" (203.2 mm) above the flowing water. It is accurate (±0.25%) and reliable. There is no obstruction to flow and no fouling. Use the built-in keypad/menu system to select your flume or weir from the menu and to choose measurement units (gallons, liters, etc.)
The Greyline OCF 6.1 includes built-in 26-million point Data Logger and flow reporting system. Connect a flash memory stick to the flowmeter's USB output to download log files and then view your data in graph and table formats with 'Greyline Logger' software – supplied free with each OCF 6.1. Daily flow reports including minimum, maximum, average, and total daily flow can be viewed directly on the backlit OCF 6.1 LCD display.
Use the isolated 4-20mA to transmit flow to remote chart recorders or displays, and the control relays are programmable for level/flow alarm, and flow proportionate pulse (for samplers, chlorinators or remote totalizers). An Intrinsic Safety Barrier is optional for sensor and cable installation in hazardous rated locations. The separate, watertight electronics/display enclosure is mounted at a convenient location within 500 ft (150 m) of the sensor.