IMP Lite

IMP Lite Lower-cost alternative to IMP+ for level measurement

IMP Lite can be used wherever you need reliable non-contacting ultrasonic level measurement and digital echo processing means IMP Lite is perfect for slurries or liquids and anywhere you need a display telling you the level, or an analogue output to interface with your site control system or drive a display. The full IMP range is available with the wetted parts in PVDF build alternative for corrosive or aggressive applications.

Compact and low-profile

When used on battery power for intermittent (wake-up) applications, IMP Lite's high speed boot up of circa 3 seconds maximises battery life. For example, if an IMP Lite were switched on every 15 minutes for a 3 second reading, average current is a mere 40µA.

Active and passive (sourcing and sinking) analogue outputs assist with system integration, especially when retro-fitting into older installations.

Contact Greyline Instruments for specific recommendations in your application.

IMP+ I.S.

IMP+ I.S. ATEX Level Sensor

IMP+ I.S. is a combined transducer and controller in one self-contained unit and is I.S. certified to ATEX EEx ia IIC T4 and IECEx.

IMP+ I.S. benefits from a specially designed digital echo processing technique and is available in three versions, 3m, 6m or 10m range. The full IMP range is available with the wetted parts in PVDF build alternative for corrosive or aggressive applications.

Simple installation

IMP+ I.S. is easy to install, just simply screw into a 1.5" or 2" universal fitting (a 1.5" or 2" adapter is available). Programming is also straightforward by simply using the LCD display and integral keypad featured on the IMP+ I.S.

IMP+ I.S. Options

IMP+ I.S. is also available with the wetted parts in PVDF build alternative for corrosive or aggressive applications.

Contact Greyline Instruments for specific recommendations in your application.

PC Suite (Optional)

Optional - PC Suite Software

PC Suite is optional software that extends IMP's capabilities, allowing you to:

• Download, analyse and store echo profiles. A great way to see exactly what is happening in the application. Fine tuning for ultimate performance.
• Set-up IMP. All programming parameters are instantly visible in the PC Suite programming screens. Program the IMP unit on a desktop before installation, or clone a number of IMPs to save valuable time.
• Updates. Future-proof your IMP! Pulsar's policy of continuous improvement means that we never stop developing our products. PC Suite allows new firmware to be installed into your IMP PC units without even removing them from the application.
• Flow Measurement. A flow curve may be added within PC Suite to configure for level to flow linearisation.

Please contact Greyline if you need more information or for advice in your application. We can provide quotations and refer you to the Greyline sales representative in your area.

Downloads

Case Studies