Level - Monitoring : Pulsar Ultra 4 & dB10 Tank Level Measurement Bundle

GREYLINE PRODUCTS

Download Product Brochure

Flow and Level Measurement Wastewater Applications Guide

Pulsar Ultra 4 Wall mount controller with dB10 threaded transducer

Pulsar Ultra 3 Fascia mount controller with dB10 threaded transducer

Pulsar Ultra 4 & dB10 Tank Level Measurement Bundle

Sophisticated and reliable non-contacting ultrasonic measurement

Ultra 4 is three controllers in one. It is the first-ever system to offer the ability to dedicate the functionality of the unit to any of three specific duties i.e. level or volume measurement, pump control, or flow measurement. Diagnostic trace information and measurement trending can be viewed directly on the display of the unit itself and automatically logged to SD card.

This bundle includes the Ultra 3 controller, dB10 Ultrasonic Transducer, and PC Suite Software with dongle.

Ultra 4

Ultra 4 Features

Non-contacting ultrasonic level control and flow measurement

Ultra 4 offers the sophistication and advanced features of the rest of the Ultra range in a compact, cost effective package and useful new features that make it even easier to set up and fine-tune. Offering as the name suggests, four alarm or control relays (3 X SPCO isolated and 1 x SPNO solid state) and a multi-functional display while loosing none of the easy set up and configuration that has made the Ultra range the natural choice for non-contacting measurement world-wide.

Like the rest of Pulsar's 'transducer plus controller' ranges, Ultra 4 is compatiable with both dB ultrasonic and dBR radar transducers. Ultra 4 can be wither wall or fasica mounted and includes HART, Profibus and Modbus digital communications options and the convenience of on-board micro SD card slot for extended data logging. Like the rest of the Ultra range, Ultra 4 also offers built in volume calculations based on standard tank shapes as well as advanced pump control and open channel flow measurement functions.

Ultra 4 Main Screen

Main Screen

Ultra 4 allows the onboard relays to be configured a choice of four behaviours. The bar graph to the left hand side of the screen gives an indiciation of level, as well as a percentage shown underneath.

Ultra 4 Trend Screen

Trend Screen

Shows you at a glance how levels have varied over time. Ultra 4 is supplied complete with an 8GB Micro SD card to increase data logging capacity.

Ultra 4 Echo Screen

Echo Screen

Displays the echo profile without the need to plug in an external device. Pulsar's DATEM software is without equal in identifying and isolating the target, but the echo profile can help in fine-tuning and improving your measurement.

Contact Greyline Instruments for specific recommendations in your application.

dB10

dB Transducer Features

Pulsar dB Series Transducers

Narrow beam angles
Integral temperature compensation
IP68/NEMA 6P
Standard 2 or 3 core screened cable extensions to 1000m
Patented DATEM (Digital Adaptive Tracking of Echo Movement) echo processing technique
FM/FMC approval
ATEX Zones 1 and 2 standard
I.S. ATEX Zone 0 options

Non-contacting sensors for level, volume and flow - liquids and solids

Pulsar's dB ultrasonic transducers offer reliable level, volume, open channel flow, pump control and differential measurement within liquid and solids applications. dB ultrasonic sensors utilise a low power transducer design with standard interconnecting cables - yet produce extremely high acoustic power to give exceptional results in a wide variety of challenging applications.

dB10 installed in shaft at Severn Trent

dB10 Transducer

300mm-10m range (0.98-33ft)
50kHz, 45mm (1.78in) dia face, <10° beam angle

Options available:*

- Standard
- PVDF
- Front threaded
- Front threaded PVDF
- Submergence shield
- Flanged DIN/ANSI
- Sanitary flange
- Foam face

*I.S. is available for all of the options above.

Please contact Greyline if you need more information or for advice in your application. We can provide quotations and refer you to the Greyline sales representative in your area.

PC Suite

PC Software Suite

PC Suite Software with Echo Trace Screenshot

Interface for all your Pulsar equipment from a single installation

Pulsar's PC Suite now includes every major piece of Pulsar software in a single, convenient downloadable package. Activated by a security 'dongle' after the 30 day evaluation period and can be installed on multiple computers.

PC Suite can be used to set-up, calibrate, clone or download data from the main range of Pulsar equipment, particularly the recording and playback of echo traces from dB transducers.

Included within PC Software Suite

PC Suite Software Screenshot

IMP PC - set-up, program, calibrate, clone and configure IMP+ and IMP Lite units
Blackbox PC - ability to create a programming template to easily set-up multiple Blackbox units, configure interfaces and outputs and to download data (depending on Blackbox unit in use)
Ultra PC - ability to set-up single or several Ultra 3 or Ultra 5 units, view live DATEM echo processing traces and view data log information
Twin PC - the same as Ultra PC but controls Pulsar's two-channel device, UltraTWIN
Sludge Finder 2 PC - control, program and calibrate Pulsar's sludge interface monitor, Sludge Finder 2. Also includes capability to program separate RAS and FLOC levels, see interface level profiles and store level data
dBi HART PC - address and configure the Pulsar's dBi HART Intelligent Transducers